Dimensions | |
---|---|
Height | 44.0 mm (1.73 in.) |
Width | 482.6 mm (19 in.) |
Depth | 516.1 mm (20.32 in.) |
Weight | 4.85 kg (10.7 lbs) |
Frequency accuracy in internal/holdover modes | ±155 × 10-9 over 1-year calibration interval; typically ±10 × 10-9 just after adjustment. |
Frequency drift | <±100 × 10-9 per year for internal and holdover modes at constant temperature |
Connector | BNC ×2, passive loop-through |
Formats |
|
Amplitude Range | −8 dB to +6 dB |
Lock Stability
±3 dB amplitude change
Jitter with burst lock Jitter with tri-level sync lock Jitter with CW lock |
<1 ns <0.5° <1 ns <1 ns (typ. 1°) |
Timing Adjustment
Range
Resolution |
± ½ color frame <0.5° of NTSC/PAL subcarrier, 1 ns for tri-level sync |
Number of Outputs | 6 |
Formats |
|
Amplitude Accuracy | ± 2% |
Timing Adjustment
Range
Resolution |
± ½ color frame Clock resolution: 18.5 ns for black burst, 13.5 ns for HD tri-level Fine resolution: 0.1 ns for black burst, 0.2 ns for HD tri-level |
Time Code (VITC)
Line Numbers
Date and Time Zone Source |
User-selectable 1 or 2 lines, default 14/16 for NTSC, 19/21 for PAL SMPTE ST 309, YYMMDD format Time-of-day with adjustable offset, or program (elapsed) time counter |
Number of Outputs | 4 outputs or 3 outputs and 1 input |
Connector | Available through D-sub 15-pin connector; Optional break-out cable to XLR connectors |
Formats | 24 fps (24 Hz or 23.98 Hz), 25 fps, 30 fps, 30 fps drop-frame (29.97 Hz) per SMPTE ST 12-1 |
Source | Time-of-day with adjustable offset, or program (elapsed) time counter |
Output Amplitude | 5V ±10%, adjustable from 0.5 V to 5 V in 0.5 V steps |
Connector | BNC ×1 |
Frequency | 48 kHz |
Output Level | 0-5 V DC (CMOS compatible) or ±1 V into 75 Ω (AES level) |
Outputs | Outputs 2 channels (1 AES/EBU pair) |
Connector | BNC ×1 |
Amplitude | 1 V ± 0.2 V |
Sampling Frequency | 48 kHz (lock on video signal) |
Quantization | Linear PCM, 20 or 24 bits |
Port Connectors | 2× SFP+ sockets. Available transceiver modules for 1G or 10G line speeds. |
Operating Modes | Leader only, Follower only, Ordinary Clock (adaptive). |
PTP Instances | 2 independent, as dual Leader, dual Follower or Follower + Leader |
Profiles | SMPTE ST 2059-2, AES67 Media Profile, IEEE 1588-2019 Default |
Communication Model | Multicast, Unicast, Mixed Multicast/Unicast |
Follower Lock Time | Typically 30 seconds for initial lock |
Follower Lock Range | ± 7.5 ppm |
Measurements | For follower, shown on user interface or available via API
|
Status Reporting | Current GM Clock Identity, Clock Class, Clock Accuracy, Time Source Message rates for Announce, Sync, Delay_Req, and Delay_Resp messages |
SMPTE Synchronization Metadata | For ST 2059-2 profile, automatically inserted in TLV data of Management messages for leader instances, and automatically decoded for follower instances |
Constellations | GPS, GLONASS, Galileo, BeiDou, QZSS |
Frequency Bands | L1 1575.42 MHz and 1602 MHz (GPS, GLONASS, Galileo) L1 1561.098 MHz (Beidou) L5 1176.45 MHz (GPS, QZSS, Galileo, BeiDou) |
Time Accuracy | Within 150 ns to UTC |
Acquisition Time | 2 minutes on boot up with warm oven, good satellite signal, and known position |
Status Reporting | Available via user interface and API
|
Connector | SMA female |
Input Impedance | 50 Ω, internally terminated |
DC antenna power output voltage | 3.3 V or 5 V at 55 mA |
Fault Protection | Short-circuit/open detection and protection |
Return loss | 15 dB for L1 band at 1575 MHz 7 dB for L5 band at 1176 MHz |
Signal Strength | Recommended 18 dB above ambient level after cable loss and signal amplifiers |
Typical | 130 VA |
Maximum | 180 VA |
Voltage Range | 100 to 240 VAC ±10%, 50/60 Hz |
Height | 29.2 cm (11.5 in.) |
Width | 64.1 cm (25.2 in.) |
Depth | 73.7 cm (29.0 in.) |
Weight | 9.6 kg (21.2 lbs.) with no options 12.0 kg (28.7 lbs.) with all options |
Product Code | Description |
---|---|
SPG9000 | SPG9000 timing and reference generator; includes loop-through genlock input, 6 analog black/tri-level outputs, 4 LTC outputs, word clock output, DARS output, general-purpose interface, and management LAN interface |
Option Code | Description |
---|---|
SPG9000-GNSS | License; SPG9000, Enable internal GNSS receiver and time synchronization features |
SPG9000-PTP | License; SPG9000, Enable PTP (IEEE 1588) support on two ports |
SPG9000-SDI | License; SPG9000, Enable SD/HD/UHD test signal generation on four SDI outputs |
SPG9000-IP | License; SPG9000, Enable ST 2110 test signal generation on two IP ports |
SPG9000-TSG | License; SPG9000, Includes both SDI and IP licenses for test signal generation |
*SDI, IP and TSG options are coming soon. |
Option Code | Description |
---|---|
SPG9000-RACK | Rackmount slides and rails kit for SPG9000 (1 RU height, standard full depth) |
SPG9000-XLR | Adapter cable (6 feet long) from 15-pin D-sub GPI/LTC connector on the SPG9000 to 4 XLR male connectors (for LTC input/outputs) and 3 BNC male connectors (for General Purpose Interface input/outputs) |
Option Code | Description |
---|---|
SPG9000-SFP-1GESR | Gigabit Ethernet short reach 850 nm SFP transceiver module |
SPG9000-SFP-10GESR | 10G Ethernet short reach 850 nm SFP+ transceiver module |
SPG9000-SFP-10GELR | 10G Ethernet long reach 1310 nm SFP+ transceiver module |
SPG9000-SFP-25GESR | 25G Ethernet short reach 850 nm SFP28 transceiver module |
SPG9000-SFP-25GELR | 25G Ethernet long reach 1310 nm SFP28 transceiver module |
Option Code | Description |
---|---|
SPG9000-SPW | Includes a single hot-swappable power supply |
SPG9000-DPW | Includes two hot-swappable power supply modules for a redundant (primary + backup) pair |
Option Code | Description |
---|---|
PWR-CORD-NA-S15 | North America Power Cord, Straight 15A |
PWR-CORD-EURO | Universal EURO Power Cord |
PWR-CORD-CHN | China Power Cord |
PWR-CORD-IND | India Power Cord |
PWR-CORD-AUS | Australia Power Cord |
PWR-CORD-UK | United Kingdom Power Cord |
PWR-CORD-BRZ | Brazil Power Cord |
PWR-CORD-CHE | Switzerland Power Cord |
PWR-CORD-JPN | Japan Power Cord |
PWR-CORD-NONE | No Power Cord or AC Adapter |
Option Code | Description |
---|---|
SPG9000 R3 | Standard Warranty Extended to 3 Years. Covers parts, labor and 2-day shipping within country. Guarantees faster repair time than without coverage. All repairs include calibration and updates. Hassle free - a single call starts the process |
SPG9000 R5 | Standard Warranty Extended to 5 Years. Covers parts, labor and 2-day shipping within country. Guarantees faster repair time than without coverage. All repairs include calibration and updates. Hassle free - a single call starts the process |
The DPW, RACK and XLR accessories can be ordered at the same time as the base SPG9000 product (see “Accessory Options” above) and shipped together in the same packaging, or they can be ordered separately and shipped in individual packaging. The ANT accessory is only shipped in separate packaging.
Product Code | Description |
---|---|
SPG9000-ACC-ANT | Multi-GNSS (GPS, GLONASS, Galileo, BeiDou) dual-band (L1 & L5) rooftop antenna that works with the integrated GNSS receiver of the SPG9000 with option SPG9000-GNSS. Includes mounting bracket. Coaxial cable with type-N connector required. |
SPG9000-ACC-DPW | Hot-swappable, redundant (backup) power supply for the SPG9000 |
SPG9000-ACC-RACK | Rackmount slides and rails kit for SPG9000 (1 RU height, standard full depth) |
SPG9000-ACC-XLR | Adapter cable (6 feet long) from 15-pin D-sub GPI/LTC connector on the SPG9000 to 4 XLR male connectors (for LTC input/outputs) and 3 BNC male connectors (for General Purpose Interface input/outputs) |
The licensed feature options for the SPG9000 can be ordered at any time after the initial base unit purchase. No hardware upgrades are necessary to enable these features.
Product Code | Description |
---|---|
SPG9000-LICENSE | Upgrade license(s) to enable features for the SPG9000 |
Option Code | Description |
---|---|
SPG9000-LIC-GNSS | License; SPG9000, Enable internal GNSS receiver and time synchronization features |
SPG9000-LIC-PTP | License; SPG9000, Enable PTP (IEEE 1588) support on two ports |
SPG9000-LIC-SDI | License; SPG9000, Enable SD/HD/UHD test signal generation on four SDI outputs |
SPG9000-LIC-IP | License; SPG9000, Enable ST 2110 test signal generation on two IP ports |
SPG9000-LIC-TSG | License; SPG9000, Includes both SDI and IP licenses for test signal generation |
*SDI, IP and TSG options are coming soon. |